Featured
How To Purge Coolant System
How To Purge Coolant System. Say thank you to the parts dept guy and swing by the drugstore or auto parts store on the way home. Start it up with the cap off of the expansion tank, let it get hot (watch the gauge, shut it off and the coolant should be low, fill it back up.

Ok to use a silica free coolant. Fyi/ at 128,000 miles , that valve you use to purge the system failed on my truck. Then top it off one more time any bit of air in the rad eventually gets pushed out the cap to reservoir.
Remove The Surge Tank Cap.
2000 bwm 528i coolant leak. Posted on oct 13, 2009. #9 · jun 29, 2009.
To Purge Air From The Cooling System, Do The Following.
Start the engine, and let it idle until the thermostat opens. Rest assured that they'll be able to help you. The 2000 bmw uses a non silica based coolant.
It's Job Is To Purge Air Out Of The Cooling System.
Pour it into the radiator,. There is a small diameter hose coming from near the top of the coolant tank,this is the purge line. If there are any cooling system vacuum leaks on cool down or a bad radiator cap this will prevent the self purging of air.
Posted On Aug 06, 2008
As your vehicle heats up and starts to circulate you will see the coolant rise and fall a little. Top off the surge tank and replace the cap. Air in a cooling system can cause overheating problems which can lead to engine damage.
The System If Not Leaking Will Purge Itself Of Air In A Few Cycles.
The most common overheating problem with the northstar engine is a blocked purge line. Air bypass solenoid circuit open. The fluid level of the coolant reservoir is higher than the thermostat housing, is there a special tool to purge the engine.
Popular Posts
Buffalo Lake Erie Wireless Systems Co Llc
- Get link
- X
- Other Apps
How Long Does Apetamin Stay In Your System
- Get link
- X
- Other Apps
Comments
Post a Comment